Electronics Fundamentals 2 Kit

Description

Recommended Digital MultiMeter:
Many lessons require a Digital MultiMeter (DMM), which is sold separately.
Save time by adding a Mastech MAS830 multimeter to your order.
(Test leads and battery included)

Jameco offers a similar model called the MAS838L,
which you can purchase directly from Jameco here.

Recommended Storage Containers:
To  help arrange all your parts, we recommend two STOREHOUSE 10 Tray Utility Boxes from Harbor Freight (Item#4058).
By purchasing two boxes, you can store all the parts from both your previously purchased Fundamentals kit and this kit.

Save time by adding the two boxes to your kit order. When you order the boxes from us, we’ll ship you a printed set of cutout tags showing specific spots for every part, but the boxes will ship separately.

Alternatively, you can buy the boxes directly from Harbor freight and either print your own set of labels or purchase a label packet from us.
Click here for information on the separate label packet.

About the parts in your kit:
Each component value comes in a separate labeled bag for easy reference.
Be sure to double check all parts using the printable list on the right as soon as you receive your kit.

Our kits are made to order. Due to shortages, we’re often forced to find different sources for parts and determine proper replacements on a monthly basis. Therefore the lead time on our kits is two to five weeks.

Parts included in this kit:

Safety
Safety Glasses, Use With or Without prescription Eyewear

LEDs
5mm Clear Red LED (Quantity of 10)

Resistors
10Ω ¼W 5% Carbon Film Resistor (Quantity of 10)
470Ω ¼W 5% Carbon Film Resistor (Quantity of 10)
2.2KΩ ¼W 5% Carbon Film Resistor (Quantity of 10)
5.1KΩ ¼W 5% Carbon Film Resistor (Quantity of 10)
470KΩ ¼W 5% Carbon Film Resistor (Quantity of 10)
1MΩ ¼W 5% Carbon Film Resistor (Quantity of 10)
10MΩ ¼W 5% Carbon Film Resistor (Quantity of 10)
1kΩ (code 102) Trimmer Potentiometer
5KΩ (code 502) Trimmer Potentiometer
500KΩ (code 504) Trimmer Potentiometer
Thermistor – Negative Temperature Coefficient

Capacitors
0.068 µF 50V Radial Ceramic Capacitor (Quantity of 2)
0.15 µF 50V Radial Ceramic Capacitor (Quantity of 2)
0.1µF 50V Radial Ceramic Capacitor (Quantity of 2)
0.22 µF 50V Radial Ceramic Capacitor (Quantity of 2)
0.1 µF 50V Radial Electrolytic Capacitor (Quantity of 2)
1 µF 50V Radial Electrolytic Capacitor (Quantity of 2)
47 µF 50V Radial Electrolytic Capacitor (Quantity of 2)
100 µF 35V Radial Electrolytic Capacitor (Quantity of 2)
220 µF 35V Radial Electrolytic Capacitor (Quantity of 2)
1000 µF 25V Radial Electrolytic Capacitor (Quantity of 2)

Transistors and Integrated Circuits
NPN Phototransistor, Wavelength sensitivity: 450 to 1080nm
741 Operational Amplifier (Op-Amp) Integrated Circuit (IC) (Quantity of 2)
386 Operational Amplifier (Op-Amp) Integrated Circuit (IC) (Quantity of 2)
555 Timer Integrated Circuit (IC) (Quantity of 2)

Switches
Tact Switch 12*12mm Through Hole SPST-NO (Quantity of 2)
9V Alkaline Battery (Brand may vary)
Solar Cell 1.5V

Prototyping Supplies
830 Point Solderless Plug-in Breadboard
Jumper Wires Male to Male 6” 28 AWG (20PCS)

Speakers and Microphones
Electret Condenser Microphone 3V ~ 10V
Stereo Earbuds
Stereo Jack Connector 3.5mm

*Additional supplies may be needed for special projects or spring break camps.
^†Other supplies are needed to complete the Earth science detector projects. Please review the project shopping list for details.